Toshiba Portege M200-S218TD User Guide - Page 186
Deleting or changing a hard disk drive user only password in System Setup, HDD PASSWORD, User Only
View all Toshiba Portege M200-S218TD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
186 Keeping Your Files Safe Using passwords in the Windows® operating system 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel illuminates (green) for approximately one second. When the following message appears on the screen: "Check system, Then press [F1] key," press F1. The System Setup screen appears. 3 Press H to move to the HDD PASSWORD section on the screen. 4 Press the spacebar to select User Only password mode. 5 Press the down arrow key to move to the User Password section. 6 Press the spacebar, then type a password of 1 to 16 characters and press Enter. You may use any combination of letters and numbers in your password. 7 When System Setup prompts you to verify the password, type it again and press Enter. If the two passwords match, System Setup displays: Registered. If the two passwords do not match, an error message appears. Repeat steps 6 and 7 to enter the password again. 8 Press End to save the change. 9 When System Setup prompts you to confirm your change, Press Y. Deleting or changing a hard disk drive user only password in System Setup To delete or change a user only password in System Setup: 1 Click Start, then click Shutdown, and click OK. The computer shuts down. 2 Hold down the Esc key and press and hold the power button until the on/off light on the system indicator panel