Toshiba RS-TX20 User Manual - Page 23
Audio/Video Output, Cable/Antenna-RF In, Connect a Channel Changing Cable - digital media server
View all Toshiba RS-TX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Setup 3: Satellite Box & RF Program Source ᕡ Make sure the satellite cable from the wall is connected to your satellite box. ᕢ Connect a Composite A/V cable from the Audio/Video Output jacks on the satellite ᕦ Connect a Channel Changing Cable (See page 5 for help choosing a channel box to the Audio/Video Input 1 jacks on the back of the DMS. ᕣ Connect the Coaxial RF cable from your antenna or cable source to the Cable/Antenna-RF In jack on the DMS. changing cable.) Serial Control cable: Plug Serial Control 1 cable connection Serial one end of the Serial Control ᕤ Connect a Composite A/V cable from the Audio/Video Output jacks on the DMS to the Audio/Video Input jacks on your TV. ᕥ Connect the phone cord (see page 8). After you complete Guided Setup, you can connect your DMS to a home network and use a broadband Internet connection instead of a phone line to connect to the TiVo service. See Chapter 8. ᕦ Connect a channel changing cable (see the diagrams to the right). ᕧ Plug in all power cords and turn on your TV. cable into the Serial/Data connector on the cable or satellite box. Plug the other end into the Control Out-Serial connector (the upper mini jack) on the back of the DMS. IR Control cable: (a) Plug the purple end of the IR Control cable into the Control Out-IR connector (the lower mini-jack) Set your TV to display video from the input jacks you used in step ᕤ. You may have to find the correct TV input setting by pressing the Input or TV/Video button on your TV's remote control until you see the Welcome screen. (For more help, see page 131.) on the DMS. (b) Locate the IR sensor (see page 6 for help). (c) Mount the IR emitters. Place one emitter on top of the cable/satellite box and the other underneath it. Be sure both emitters stick out about Once you see the Welcome screen, you're ready to complete Guided Setup. If you need 1.5 inches directly in front of the IR sensor. Use the help, see Chapter 2. provided adhesive strips to hold the emitters in place. Cable or Satellite Box c b Digital Media Server ® IR Control cable connection a 15