Toshiba SD-2705U Owners Manual - Page 38

PAGE 38 INITIAL SETTINGS Selecting Digital Audio Output Each DVD disc has a variety of audio output options. Set the player's Digital Audio Output according to the type of audio system you use. 1 At the SETUP screen, press D/E to select Digital Audio Output and press G. Disc Audio Disc Subtitle Disc Menu Rating Password TV Aspect Menu Language Progressive Digital Audio Output 5.1 Speaker Setup Others /PCM DOLBY DIGITAL Stream/PCM PCM Sample Freq. 48 KHz 96KHz 2 1, 2 2 Press D/E to select the desired output and press SELECT/ENTER. You can select Digital Audio Output or Sampling Frequency item by pressing SELECT/ENTER. I Digital Audio Output DOLBY DIGITAL/PCM: Select "DOLBY DIGITAL/PCM" if an active digital output is supplied to a Dolby Digital decoder, (or an amplifier or other equipment with Dolby Digital decoder). Stream/PCM: Select "Stream/PCM" if an active digital output is supplied to an amplifier or other equipment with DTS decoder, Dolby Digital decoder and MPEG decoder. PCM: Select "PCM" if an active digital output is supplied to an amplifier or other equipment with linear PCM only (or MD recorder or DAT deck). Playback Disc 96 kHz Linear PCM DVD DTS DVD Dolby Digital DVD MPEG DVD Audio CD/ Video CD DTS Audio CD Stream/PCM PCM OUTPUT Dolby Digital/ PCM PCM DTS bit Stream DTS bit Stream Dolby Digital bit Stream Dolby Digital bit Stream MPEG bit Stream PCM PCM PCM DTS bit Stream DTS bit Stream PCM only PCM DTS bit Stream PCM PCM PCM DTS bit Stream I Sampling Frequency To change the Sample Frequency setting, first select the desired digital audio output type as indicated above. If your A/V receiver or surround processor is NOT capable of handling 96kHz signals, select the 48kHz option. When this choice is made, this unit will automatically convert any 96kHz signals to a 48kHz output so that your system is capable of decoding them. If your A/V receiver or surround processor is capable of handling 96kHz signals, select the 96kHz option. When this choice is made, this unit will pass each type of signal through without any further processing. Notes ❍ When you are not using the player's digital audio output, don't select any of the options. ❍ If an active digital audio output signal is supplied to a receiver or other equipment without a corresponding digital decoding capability, a very loud noise may be produced which could permanently damage the speakers. ❍ The DTS DVD disc sound is played back only when the DVD player is connected to a receiver with a DTS decoder.