Toshiba SD-3800U Owners Manual - Page 20

Connections Connecting to an amplifier equipped with a Dolby Digital decoder Dolby Digital Dolby Digital is the surround sound technology used in theaters showing the latest movies, and is now available to reproduce this realistic effect in the home. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of You can enjoy motion picture and live concert DVD video discs with this dynamic Dolby Laboratories. Confidential realistic sound by connecting the DVD player to a 6 channel amplifier equipped with a Dolby Digital decoder or Dolby Digital processor. If you have a Dolby unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Surround Pro Logic decoder, you will obtain the full benefit of Pro Logic from the • Use DVD video discs encoded via same DVD movies that provide full 5.1-channel Dolby Digital soundtracks, as well the Dolby Digital recording as from titles with the Dolby Surround mark. system. • Make the following setting. Amplifier equipped with a Dolby Digital decoder To OPTICAL type digital audio input To COAXIAL type digital audio input VIDEO OUT VIDEO Y PB AUDIO OUT PR S R L COAXIAL OPTICAL ANALOG BITSTREAM/PCM Connect either. 75 Ω coaxial cable Optical digital cable On-screen display "Digital Output" Recording system Select: "Bitstream" D Page 56 59 42 Connecting to an amplifier equipped with Dolby Surround Pro Logic Dolby Surround Pro Logic You can enjoy the dynamic realistic sound of Dolby Surround Pro Logic by connecting an amplifier and speaker system (right and left front speakers, a center speaker, and one or two rear speakers). With an amplifier equipped with Dolby Digital Connect the equipment the same way as described in "Connecting to an amplifier equipped with a Dolby Digital decoder." Refer to that amplifier's owner's manual and set the amplifier so you can enjoy Dolby Surround Pro Logic sound. With an amplifier not equipped with Dolby Digital Connect the equipment as follows. Amplifier equipped with * Dolby Surround Pro Logic VIDEO OUT VIDEO Y PB AUDIO OUT PR S R L COAXIAL OPTICAL ANALOG BITSTREAM/PCM To audio input ANALOG AUDIO OUT • Make the following setting. On-screen display "Digital Output" Select: "Bitstream" or "PCM" Page 56 59 Be sure to set "Digital Output" to "Bitstream" or "PCM" when you enjoy sounds of Dolby Surround Pro Logic using this connection. * Connect one or two rear speakers. The output sound from the rear speakers will be monaural even if you connect two rear speakers. Audio cable 21