Toshiba SD-4205N Owners Manual - Page 61
Operating a TV with the Remote Control
View all Toshiba SD-4205N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Operating a TV with the remote control You can operate the basic functions of selected TVs using the supplied remote control. Operating a TV with the remote control POWER TV/VIDEO VOL CH ENTER Number buttons Preparation Follow the instruction of "To program the remote control" to set the brand code. Point the remote control at your TV, and use buttons as follows. POWER TV/VIDEO VOL / CH / To turn the power on and off. To select a video input. To adjust the volume. To select a channel. To program the remote control 1 While holding down ENTER, press the number buttons that correspond to your TV's brand code referring to the list on the next page. e.g. To Program brand code 0071. ENTER 0 0 7 1 POWER TV/VIDEO VOL CH Close the cover to use these buttons. Hold down. 2 Release ENTER. The DVD remote control memorizes the selected brand code. Notes • The remote control is programmed at the factory to operate TOSHIBA TVs. • A single brand may use different codes depending on the particular model. Enter the correct number referring to the brand code table. • For some brands, several brand codes are provided. Try each of them until the remote control operates your TV. • Some TVs may not respond to all of the functions in the table above, or may not be operated at all with this remote control. In this case, operate that TV with its own remote control. • If you replace the remote control's batteries, remember to reprogram the brand codes for TV. Function setup 65