Toshiba SD-5980 Owners Manual - Page 38

Function setup - reset

Get Toshiba SD-5980 PDF manuals and user guides View all Toshiba SD-5980 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

Function setup Customizing the function settings (continued) Setting details Output You can select the video output signal of the DVD video player to the TV from "Interlace" or "Progressive". 1) Press C or D to select "Output". 2) Press A, then press C or D to select "Interlace" or "Progressive". Interlace: Select when connecting to a composite TV or a TV equipped with component video inputs but progressive scan is not compatible. Progressive: Select when connecting to a TV equipped with component video inputs, progressive scan compatible. 3) Press ENTER. Warning: Once "Progressive" is selected when connecting to a TV progressive scan incompatible, no image will be seen on the video display. In this case, you must reset the unit by pressing STOP on the front panel for five seconds. The video output will be restored to "Interlace" setting, and a picture will once again be seen on a conventional analog display. Notes: • Some discs may not be played back with the progressive scanning mode correctly because of the disc characteristics or recording condition. • Once Progressive scan on, all other video outputs are disabled except component video outputs. Note: If each setup (pages 35~38) has been completed, the unit can always be worked under the same conditions (especially with DVD discs). Each setup will be retained in the memory even if you turn the power off. 38 2F60201A [E] P34-38 38 Downloaded from www.Manualslib.com manuals search engine 2/22/05, 10:48 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
38
Setting details
Customizing the function settings (continued)
Function setup
Output
You can select the video output signal of the DVD
video player to the TV from “Interlace” or “Progres-
sive”.
1)
Press
C
or
D
to select “Output”.
2)
Press
A
, then press
C
or
D
to select “Interlace”
or “Progressive”.
Interlace:
Select when connecting to a composite TV or
a TV equipped with component video inputs
but progressive scan is not compatible.
Progressive:
Select when connecting to a TV equipped
with component video inputs, progressive scan
compatible.
3)
Press
ENTER
.
Warning:
Once “Progressive” is selected when connecting to
a TV progressive scan incompatible, no image will
be seen on the video display.
In this case, you must reset the unit by pressing
STOP
on the front panel for five seconds. The video
output will be restored to “Interlace” setting, and a
picture will once again be seen on a conventional
analog display.
Notes:
• Some discs may not be played back with the progressive
scanning mode correctly because of the disc characteris-
tics or recording condition.
• Once Progressive scan on, all other video outputs are
disabled except component video outputs.
Note:
If each setup (pages 35~38) has been completed, the unit
can always be worked under the same conditions
(especially with DVD discs).
Each setup will be retained in the memory even if you
turn the power off.
2F60201A [E] P34-38
2/22/05, 10:48 AM
38
Downloaded from
www.Manualslib.com
manuals search engine