Toshiba SD-K530SU Owners Manual - Page 41

REFERENCE Troubleshooting (Continued) Symptom Some channels are skipped over when using CH/TRK (+/-) Picture and sound of broadcasting channel are weak or missing. Cause Those channels were deleted with the CH. ADD/DEL option. Antenna or cables are loose. Wrong TUNING BAND option is being used. Camcorder image is not shown. Camcorder image via A/V input to DVD+VCR is not shown on TV screen. Timer recording is not possible. TIMER indicator appears after DVD+VCR is turned off. Stereo Audio Record and/or Playback is not present. Camcorder is off. DVD+VCR SOURCE SELECT is not set to LINE1 or LINE2. Clock in DVD+VCR is not set to correct time. Timer has been programmed incorrectly. TIMER indicator does not appear after programming timer. DVD+VCR is in Timer Recording mode. TV is not Stereo-compatible. Broadcast program is not in stereo format. DVD+VCR A/V Out jacks are not connected to TV A/V In jacks. DVD+VCR Audio/Video Out is not selected for viewing at the TV. DVD+VCR BROADCAST TYPE mode is set to SAP or MONO. Correction Use CH. ADD/DEL. to restore channels. See "Channel Selection" on page 15. Tighten connections or replace cable. Try all TUNING BAND options. See "Channel Selection" on page 15 for details. Turn camcorder on and operate properly. Press INPUT SELECT to select LINE input channel (LINE1 or LINE2). Set clock to correct time. See "Setting the Clock" on page 16. Reprogram Timer. See "Timer Recording" on page 23. Reprogram Timer This is the normal indication that the DVD+VCR is in TIMER mode. No action is possible. No action is possible. Make A/V connections. Stereo is available only via A/V output from DVD+VCR. Select AUX or A/V source as TV input. Set BROADCAST TYPE mode to STEREO. See "Setting the VCR Setup Menu" on page 15. 41