Toshiba SD-V592 Owners Manual - Page 38
Controlling Your TV with the Supplied Remote
View all Toshiba SD-V592 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Controlling Your TV with the Supplied Remote The remote control can be compatible with various brands of TV/Cable box/DSS satellite receiver by setting their control codes. The TOSHIBA code has initially been set to control TOSHIBA TVs. Setting TV Control Codes 1. Press TV to set the remote control operating your TV. 2. While holding down PROGRAM button, enter the two digits of your TV's brand code (listed on page 39) using number buttons. 3. Release PROGRAM. By pressing POWER CH/TRK +/- VOL +/- Number buttons 100 DISPLAY INPUT SELECT ENTER You can Turn the TV on or off. To select TV channels in the upper or lower direction. Adjust the volume of the TV. To select TV channels. When selecting channels 1 to 9, first enter 0 and then the desired number. To substitute for 100 channel key. To turn on or off TV's screen display. Switch the TV's input source between the TV and other input sources. To use for the TV's ENTER key. Important Some TV's may not respond to all the operations above, or may not be operated at all with this remote control. In this case, operate your TV with its own remote control. Notes: For some brands, several control codes (brand codes) are allocated. Try each of them until the buttons work on your TV. If you replace the remote control's batteries, set the brand code again. DISPLAY INPUT SELECT TV POWER PROGRAM Number buttons 100 CH/TRK, VOL ENTER 38