Toshiba Satellite C40-B PSCJQC-005006 Users Manual Canada; English - Page 88
Restoring the pre-installed software from your created Recovery Media
View all Toshiba Satellite C40-B PSCJQC-005006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
USB Flash Memory will be formatted and all the data in the USB Flash Memory will be lost when proceeding. 2. Turn on your computer and allow it to load the Windows operating system from the Hard Disk Drive as normal. 3. Insert the first blank disc into the optical disc drive tray, or insert the USB Flash Memory into one available USB port. 4. Click Start -> All Programs -> TOSHIBA -> Support & Recovery -> Recovery Media Creator. 5. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button. Restoring the pre-installed software from your created Recovery Media If the pre-installed files are damaged, you are able to use the Recovery Media you have created to restore the computer to the state it was in when you originally received it. To perform this restoration, follow the steps below: When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. 1. Load the Recovery Media into the Optical Disc Drive or insert the recovery USB Flash Memory into one available USB port. 2. Turn off the computer's power. 3. While holding down F12 key on the keyboard, turn on your computer - when the TOSHIBA Leading Innovation >>> logo screen appears, release the F12 key. 4. Use the up and down cursor key to select the appropriate option from the menu according to your actual recovery media. 5. A menu will be displayed from which you should follow the on-screen instructions. If you have previously chosen to remove the recovery partition and are trying to create "Recovery Media", you will see the following message: "The Recovery Media Creator can not be launched because there is no recovery partition." When there is no recovery partition, the Recovery Media Creator cannot make Recovery Media. However, if you have already created a "Recovery Media", you can use it to restore the recovery partition. If you have not created "Recovery Media", please contact TOSHIBA support for assistance. User's Manual 5-15