Toshiba Satellite NB15t-A1302 User Manual - Page 56
LAN, LAN cable types, Installing the battery pack
View all Toshiba Satellite NB15t-A1302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
6. Release the battery pack as shown below to remove it from the computer. Figure 4-3 Releasing the battery pack 1 LAN 1. Battery pack Installing the battery pack To install a battery pack, follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer. 2. Ensure that the battery pack is securely in place and secure it with two screws. 3. Turn your computer over. The computer may have built-in support for Ethernet LAN (10 megabits per second, 10BASE-T) or Fast Ethernet LAN (100 megabits per second, 100BASE-TX). This section describes how to connect/disconnect to a LAN. Do not install or remove a memory module while Wake-up on LAN is enabled. The Wake-up on LAN function consumes power even when the system is off. Leave the AC adaptor connected while using this feature. The Link speed (10/100 megabits per second) changes automatically depending on the network conditions (connected device, cable or noise and so on). LAN cable types The computer must be configured properly before connecting to a LAN. Logging onto a LAN using the computer's default settings could cause a malfunction in LAN operation. Check with your LAN administrator regarding set-up procedures. User's Manual 4-11