Toshiba Satellite P105-S6064 User Guide 2 - Page 5

Toshiba USB TV Tuner Quick Guide 5 4 Start Microsoft® Windows® XP Media Center Edition 2005. 5 Go to Settings, select TV, and then select Setup TV Signal. 6 Follow the instructions on the Setup Wizard screens. Cable TV or Satellite TV with set-top box For this setup, you will need the following cables: ❖ One USB cable ❖ One coaxial adaptor cable ❖ Two RF coaxial cables (1 to 3 feet in length)(not included) ❖ One splitter (not included) Call your cable or satellite provider for the recommended splitter. To add the Toshiba TV Tuner to an existing cable TV or satellite TV connection: 1 Disconnect the RF coaxial cable from the set-top box OUT. Replace it with one of the short-length RF coaxial cables and connect the other end to the splitter IN. 2 Take the original RF coaxial cable removed in step one and connect it to one of the OUT jacks on the splitter. This should be connected to your TV. 3 Connect the other short-length RF coaxial cable into the other splitter OUT jack. Then connect the other end of the short-length coaxial cable into the SMB end (threaded) of the coaxial adapter cable. 4 Connect the RF end (small end) of the coaxial adapter cable into the left side of the TV Tuner. 5 Plug the small end of the USB cable into the right side of the TV Tuner. 6 Plug the large end of the USB cable into a USB port on the notebook computer.