Home » Toshiba Manuals » UPS » Toshiba T42F3F500XAMBN » Manual Viewer

Toshiba T42F3F500XAMBN User Manual - Page 52

Key Functions, 18.1 MONI, 18.2 IN, 18.3 OUT

View all Toshiba T42F3F500XAMBN manuals

Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

TOSHIBA 6.18 Key Functions 6.18.1 MONI After the UPS has been successfully started, the system will be in the normal 'AC Input Mode' of operation. The LCD screen will automatically display the main MONI (monitor) function. If the MONI key is pressed at this time the screen output will not change. The MONI function automatically monitors the entire UPS system. The LCD screen will automatically switch "off" after a period of keypad inactivity and switch "on" if any key is pressed. It will switch "on" automatically during battery discharge or if an abnormality develops in the system (see "Settings for LCD Display Duration"). All system 'line' messages will be displayed from MONI mode when abnormal operating problems are detected. If AC input power is available and the UPS is operating normally, the following system message is displayed: - UPS ON-LINE OUTPUT VOLTAGE= 208 V CURRENT=100/100/99% DATE (DAY) TIME If an AC input power failure occurs, and no abnormal operating conditions are present, the UPS switches to standard 'Battery Backup Mode'. The following system message is displayed: - BATTERY BACKUP - OUTPUT VOLTAGE = 208 V CURRENT=100/100/99% DATE (DAY) TIME 6.18.2 IN When the IN key is pressed during normal 'AC Input Mode' of operation, the LCD screen displays details about the unit's input voltage. The following system message is displayed: - UPS ON-LINE INPUT Vab = 96% VOLTAGE Vbc = 96% Vca = 96% The Bypass Input Voltages, Frequencies / Sync Mode, and Converter Current can be monitored by pressing the "UP/DOWN" keys. 6.18.3 OUT When the OUT key is pressed during normal 'AC Input Mode' of operation, the LCD screen displays details about the output voltage, current, and frequency. The following system message is displayed: - UPS ON-LINE OUTPUT Ia = 101% CURRENT Ib = 100% Ic = 100% The Output Line Voltages (phase-neutral, and phase to phase), Frequencies / Sync Mode, Inverter Output Power, and Power factor can be monitored by pressing the "up/down" keys. 4200FA CT/XT User's Manual 51

Section	Page
TABLE OF CONTENTS	3
1.0 Product Description	15
1.1 Theory of Operation	15
1.2 Application and Use	15
1.3 Power Backup	15
1.4 Power Conditioning	15
2.0 Unpacking/Inspection/Storage/Disposal	16
2.1 Unpacking the new UPS equipment 15/25/30 kVA:	16
2.2 Unpacking the new UPS equipment 50 kVA:	17
2.3 Inspection of the new UPS equipment	17
2.4 Storage of UPS equipment	18
2.5 Disposal	18
3.0 Installation Precautions	19
3.1 Equipment Placement	19
3.2 System Preparation (Pre-Power)	20
3.3 Operating Precautions	20
4.0 UPS Connections	21
4.1 Power Connections	21
4.1.1 Power Connections 15/25/30 kVA with Internal Batteries	21
4.1.2 Power Connections 15/25/30 kVA with Internal Transformer	22
4.1.3 Recommended Wire Size and Torque Requirements	23
4.1.4 Power Connection Cable Routing and Conduit Placement 15/25/30 kVA	24
	25
4.2 Control Circuit and External Battery Interface Connections 15/25/30 kvA	25
	25
4.2.1 Recommended Wire Size and Torque Requirements	25
4.3 Power Connections 50 kVA	26
4.3.1 Recommended Wire Size and Torque Requirements For UPS Input and Output Terminals	27
	27
4.3.2 Power Connection Cable Routing and Conduit Placement 50 kVA	28
4.4 Control Circuit and External Interface Connections 50 kVA	29
4.4.1 Recommended Wire Size and Torque Requirements	29
4.5 Communication Interface	30
4.5.1 Remote Contact	30
4.5.2 RS-232C	31
4.5.3 UPS Shutdown (via RS-232C)	31
5.0 Specifications	32
5.1 4200FA 15 / 25 kVA @ 208 VAC Input/ 208 VAC Output w/Internal Batteries	32
5.2 4200FA 15/25 kVA w/Internal Transformer	33
5.3 4200FA 30 kVA @ 208 VAC Input/ 208 VAC Output w/Internal Batteries	34
5.4 4200FA 30 kVA w/Internal Transformer	35
5.5 4200FA 50kVA @ 208 VAC Input/ 208 VAC Output w/Internal Batteries	36
5.6 4200FA 50kVA w/Internal Transformer	37
6.0 Operating the UPS	38
6.1 AC Input Mode (Normal Operation)	38
6.2 Bypass Mode	39
6.4 Battery Backup Mode	40
6.5 Battery Backup Time and Discharge Process	41
6.6 Battery Low Voltage Tolerances	41
6.7 Battery Recharging	42
6.8 Front Panel Layout (All Units)	43
6.9 EPO (Emergency Power Off) Function	43
6.10 Audible Alarm Functions	44
6.11 LED (Light Emitting Diode) Functions	44
6.11.1 LED (Light Emitting Diode) System Status	45
6.12 LCD (Liquid Crystal Display) Functions	45
6.12.1 Line-1 System Messages	45
6.12.2 Line-2 System Fault Messages	46
6.12.3 Line-3 System Messages	46
6.12.4 Line-4 System Messages	46
6.13 Initial Battery Charge	47
6.14 Start-up Procedure	48
6.15 Shutdown Procedure	49
6.16 Maintenance Bypass Procedure	49
6.17 Keypad Overview	51
6.18 Key Functions	52
6.18.1 MONI	52
6.18.2 IN	52
6.18.3 OUT	52
6.18.4 BATT Key	53
6.18.5 MENU, F1, ENTER, UP, & DOWN Keys	53
6.18.6 BATT TEST Key	53
6.18.7 BUZZ STOP Key	54
6.18.8 RESET Key	54
6.19 Menu Data Screens	55
6.19.1 Settings for Calendar and Clock	55
6.19.2 Adjusting the Buzzer Volume	55
6.19.3 Settings for Display Duration	55
6.19.4 Run Switch Select	56
6.19.5 Serial Com Station Address	56
6.19.6 Output Voltage Adjustment	57
6.19.7 Equalize Charge Mode Select	57
6.19.8 Reset to Default Settings	58
6.20 Overload Operation	58
6.21 Backup History and Fault History	59
7.0 UPS Protection System	61
7.1 System Protection Features	61
7.2 System Protection Functions	61
8.0 Start-up/Scheduled Maintenance/Part Replacement	62
8.1 Start-up	62
8.2 Preventive Maintenance	62
8.3 Parts Replacement	63
9.0 External Dimensions / Shipping Dimensions / Weights	64
9.1 External Dimensions 15/25/30 kVA	64
9.2 External Dimensions 50kVA	65

Match case Limit results 1 per page

TOSHIBA

6.18

Key Functions

6.18.1 MONI

After the UPS has been successfully started, the system will be in the normal 'AC Input

Mode' of operation. The LCD screen will automatically display the main MONI (monitor)

function. If the MONI key is pressed at this time the screen output will not change. The

MONI function automatically monitors the entire UPS system. The LCD screen will

automatically switch "off" after a period of keypad inactivity and switch "on" if any key is

pressed. It will switch "on" automatically during battery discharge or if an abnormality

develops in the system (see "Settings for LCD Display Duration"). All system 'line'

messages will be displayed from MONI mode when abnormal operating problems are

detected. If AC input power is available and the UPS is operating normally, the following

system message is displayed:

- UPS ON-LINE -

OUTPUT VOLTAGE= 208 V

CURRENT=100/100/99%

DATE (DAY) TIME

If an AC input power failure occurs, and no abnormal operating conditions are present, the

UPS switches to standard 'Battery Backup Mode'. The following system message is

displayed:

- BATTERY BACKUP –

OUTPUT VOLTAGE = 208 V

CURRENT=100/100/99%

DATE (DAY) TIME

6.18.2 IN

When the IN key is pressed during normal 'AC Input Mode' of operation, the LCD screen

displays details about the unit's input voltage. The following system message is displayed:

- UPS ON-LINE -

INPUT

Vab = 96%

VOLTAGE

Vbc = 96%

Vca = 96%

The Bypass Input Voltages, Frequencies / Sync Mode, and Converter Current can be

monitored by pressing the "UP/DOWN" keys.

6.18.3 OUT

When the OUT key is pressed during normal ‘AC Input Mode’ of operation, the LCD screen

displays details about the output voltage, current, and frequency. The following system

message is displayed:

- UPS ON-LINE -

OUTPUT

Ia = 101%

CURRENT

Ib = 100%

Ic = 100%

The Output Line Voltages (phase-neutral, and phase to phase),

Frequencies / Sync Mode, Inverter Output Power, and Power factor can be monitored by

pressing the "up/down" keys.

4200FA CT/XT User’s Manual