Toshiba TDP-ET20 User Manual - Page 22
Preparing and using the remote control
View all Toshiba TDP-ET20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preparing and using the remote control ■ Loading dry-cell batteries into the remote control (1) Remove the battery cover. ■ Point the remote control toward the projector's infrared remote sensor and press a button. • Operating the projector from the front (2) Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly. Two batteries (R03, size AAA) are used. (3) Put back the battery cover. • Operating the projector from the rear Preparations Dry-cell batteries • Before using the batteries, be sure to observe the Safety Precautions described in previous pages. • Remove batteries from remote control when not using for extended periods. • If the remote control stops working, or if its range decreases, replace all the batteries with new ones. The remote control • The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting. • Do not drop the remote control or strike it on a hard surface. • Do not leave it in a hot or humid location. • Do not get it wet or place it on top of wet objects. • Do not take it apart. • In rare cases, ambient conditions could impede the operation of the remote control. If this happens, point the remote control at the main unit and repeat the operation. 21