Toshiba TDP-ET20 User Manual - Page 51
Lamp replacement Continued
View all Toshiba TDP-ET20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Lamp replacement (Continued) CAUTION • If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it. • If the lamp should break, please handle with care to avoid injury due to broken pieces and contact your dealer for repair service. 1 Unplug power cord. 2 Wait until lamp is sufficiently cooled. Wait for at least 1 hour. 3 Keep the projector stationary. Do not move the projector while replacing the lamp. 4 Remove the lamp cover. Loosen the two screws and raise the lamp cover. If necessary, use a screwdriver or other small tool to remove the cover. Use care to avoid damaging your fingers. 5 Remove the lamp. Loosen the three lamp locking screws and pull up the handle to release the lamp. Remove the lamp. 50