Toshiba TDP-PX10U Mobile Projector TDP-PX10U Owner's Manual - Page 36

Using the menus (continued) Default setting menu Item Description RGB Y/PB/PR Video S-video USB Sets projection mode in accordance with Yes Yes Projection mode Placement Styles. p.24 (Standard) (Rear) Yes Yes Language Select one of the languages below for the menu Yes Yes and messages. [ : Enter setting mode] J[ :Selection]J [ : Apply] English/ Français/ Español/ Português Yes Yes Display start-up screen when power is turned on. Yes Yes Start-up screen On Off Yes Yes Set whether the input with signals is only Yes Yes Auto input search selected or not. On Off Yes Yes Fan mode [See note below] Sets the cooling fan speed. Normal High Yes Yes Yes Yes Lamp power [See note below] Sets the lamp power. Normal Low Yes Yes Yes Yes Power on [See note below] Reset all Sets whether to turn on the power when the ON/ Yes Yes STANDBY button is pressed (Manual), or when the power is supplied (Auto). Manual Auto Press . (The language is not reset.) Yes Yes Resets all adjustments and settings to their factory settings. Yes No Yes Yes Yes Yes Note • Set the [Fan mode] to [High] when using the projector at the high altitude (higher than 600m or 2,000 ft.). In the mean time, the system will set the [Lamp power] to [Low] automatically, and is not allowed to change the setting. Do not set Fan mode to [High] when using the projector at a lower altitude. • If [Power on] is set to [Auto] and there is a power outage, the projector will come on once power is restored. 36