Toshiba TDP-S9 Owners Manual - Page 21

Operations Turning the power on and off ■ Connecting the power cord 1 Insert the power cord connector into the AC IN socket of the projector. 2 Insert the power cord plug into a wall or other power outlet. Power cord connector (Supplied) ■ Removing the lens cover Be sure to remove the lens cover when the power is turned on. If it is left on, it could become deformed due to heat. ■ Turning the power on 1 Turn on the main power switch The ON indicator will change to green flashing, indicating standby mode. 2 Press the I/ ON/STANDBY button. The power turns on, and the following 2 green indicators light: ON and LAMP. After a moment, the start-up screen appears. Control panel Remote Control (Green) Flashing Start-up screen CAUTION • Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes or sight. • Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating. • Do not place your hands, face, or other objects near the air exhaust. Doing so could cause burns, deform/break the object. Operations 21