Toshiba TDP-T90 User Manual - Page 18
Using the document camera - projector replacement
View all Toshiba TDP-T90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the document camera Please read this chapter if the model you purchased is TDP-T91 which includes a document camera. ■ How to use the document camera Using the camera attached on the projector Status before preparation (When stored) 1) Set up arm. 2) Rotate arm. 3) Raise camera head. Using the camera removed from the projector Status before preparation (When stored) 1) Disconnect the RGB cable, then slide the lock switch to release lock. 2) While pushing the lock lever in the arrow direction, lift up the document camera. ᶄ ᶃ 3) Remove the document 4) Extend the tip resistant camera from the tray. bars to set the Pull up toward direction q document camera. 5) Connect the document camera and the projector using the supplied RGB cable. ᶃ PRECAUTIONS • For camera interconnection, be sure to use the supplied RGB cable (25 cm or 3 m). If you use the other cables, the normal operation may not be achieved and even the malfunction may result. • When moving the projector with the camera attached, do not grab the camera arm and/or the camera head. • When moving the projector with the camera attached, first ensure that the camera is securely locked in position on the tray. • Insert the RGB cable straight and securely until it is fixed in place. • Do not jolt or force the camera head or camera arm. Doing so could cause malfunction. • Note that when extending or rotating the camera arm, the arm moves in an arc. Take care not to bump yourself or others with it. • When placing the projector in the carrying bag, remove the connection cables. Otherwise, damage to the connectors and cables may result. PRECAUTIONS • Installation of the document camera onto the tray should be performed in the reverse order shown above. • When replacing the document camera on the tray, ensure that the lock lever is securely locked in position. • When using the tip resistant bars, pull them fully until each forms the angle of 90 degree. If you don't use the bars, the camera may topple over. Operations 34 35