Toshiba TDP-T90 User Manual - Page 9
Parts on the rear panel, Names of each part on the control panel and remote control - power
View all Toshiba TDP-T90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Names of each part on the control panel and remote control Control panel Remote Control Remote control transmitter (9) (10) (11) (3) (4) (8) (1) (6) (2) (13) (12) (1) (7) (2) (8) (6) (3) (4) (7) (5) Name (1) ENTER button (2) MENU button (3) SET UP button (4) ON/STANDBY button (5) ON indicator (6) INPUT button (7) RETURN button (8) Selection button (9) LAMP indicator (10) TEMP indicator (11) FAN indicator (12) FREEZE button (13) MUTE button : Main Function : Accepts the selected mode. : Displays menus. p.29 : Sets up image and mode. p.26 : Turns the power on/off (standby). p.22 : Displays whether power is on or off. p.22 : Selects input. p.24 : Goes back one screen. : Menu selections and adjustments,etc. p.30 : Displays lamp mode. p.23 : Lights when internal temperature too high. p.41 : Displays cooling fan mode. p.41 : Pauses image. p.28 : Cuts off the picture and sound temporarily. p.28 Note • For the remainder of this manual, buttons are referred to as follows: Selection buttons ⇒ ; ENTER button ⇒ 16 Parts on the rear panel (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (15) Name (1) Infrared remote sensor (2) CONTROL terminal (3) USB terminal (4) AUDIO (L/R) terminal (5) VIDEO terminal (6) AUDIO (L/R) terminal (7) S-VIDEO terminal (8) COMPUTER 1 terminal (9) AUDIO OUT terminal (10) MONITOR terminal (11) COMPUTER 2 terminal (12) Main power switch (13) AC IN socket (14) AUDIO IN terminal (15) Antitheft lock hole (14) (13) (12) : Main Function : Senses commands from the remote control. p.19 : When operating the projector via a computer, connect this to the controlling computer's RS-232C port. p.47 : Terminal for service purpose. Do not make any connection. : Input audio signals from video equipment. : Input video signals from video equipment. : Input audio signals from video equipment. : Input S video signals from video equipment. : Input RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. : Outputs audio signals. : Connect to a computer display, etc. : Input RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. For TDP-T91, use exclusively for document camera connection. : AC power line ON (standby)/OFF. : Connect the supplied power cord here. : Input audio signals from a computer or video equipment with a component video signal output terminal. : Attach a safety cable or any other antitheft device. Note • Although this owner's manual abbreviates component video signals as Y/PB/PR, the product also supports signals from video equipment marked "Y/CB/CR." 17 Preparations