Toshiba TDP-TW95 User Manual - Page 15

Using handy features ■ Easy setup This function automatically adjusts the screen focus and corrects the keystone distortion (Auto focus and Auto keystone functions). Press the EASY SETUP button on the projector or on the remote control. The icon will appear during processing. • Before pressing the EASY SETUP button, be sure to set Auto focus and select the items to be adjusted by Auto adjustment p.41 . • With [Power on Easy setup] in the Default setting menu set to [On], the screen focus is automatically adjusted and the keystone distortion (vertical) is corrected when the power is turned on. (Automatic keystone distortion correction and auto-setting are selected by factory setting.) • The following screen appears during Auto focus. Control panel Remote Control Note • A message appears on the screen if the auto-adjustment fails. Precautions • Auto focus function is effective for projection distance from 1.1 m (30 inch at maximum zoom) to 5.5 m (150 inch at maximum zoom). • Depending on the room temperature and brightness as well as the projected image condition and the projecting surface condition and material, the adjustment may not be properly made. When such a case arises, adjust the screen focus manually. • Improper adjustment or correction may also occur if the AF sensor is obstructed or the window gets dirty. Remove the obstruction and clean the AF sensor window in such a case. • After performing Easy setup at power-on, the projected image may appear to be out of focus after a while. In that case, perform Easy setup again. • Avoid impact on the projector. Otherwise, Auto focus may not work properly. ■ Using auto setting (Only for input from computer) This function automatically adjusts the projector settings such as sampling phase, frequency, screen position, and clamp for each type of the input signal by using simple operations. Press the remote control's AUTO SET button. For computer input, the icon will appear during processing. You can set as well by selecting [Auto setting] in the Image adjustment menu p.36 . Remote Control Notes • The image may not be projected or auto adjustment/setting may not be performed correctly for input signals other than those supported by the projector p.87 , p.88 . • If auto setting fails adjustment, adjust manually with [Position] in the Image adjustment menu p.36 . ■ Correcting the keystone distortion When the projector placement angle against the screen is changed while projecting the image, the picture will undergo keystone (trapezoidal) distortion. This projector is capable of correcting this keystone distortion. Before correction After correction Control panel Remote Control 1 Press the KEYSTONE button. The Keystone menu appears. By default, [Auto v-keystone] is selected. Item Auto v-keystone V-keystone Description Automatically corrects the vertical distortion. Press . Screen shrinking at bottom Screen shrinking at top Operations 28 29