Toshiba TDP-TW95 User Manual - Page 21

Using the menus (Continued) Notes • You can register a logo from computer input only. • The area that can be registered is 512 × 384 dots at the center of the screen. To register a company logo, prepare the image within the limit. • Only one logo can be registered. When a new image is registered, the old one is erased. • The time needed to register or display the image varies depending on the data size. • If you use this function on commercial video software, broadcast or cable- broadcasting except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. Select the size of the registered logo. : Displays the registered image in original size at center of the screen. : Displays the registered image by enlarging fully in the screen. (As processed digitally, the image quality is degraded.) Sets background color when [Center] is selected for the logo [Display style]. You can preview the registered logo. You can reset the registered logo, display style and background to the factory setting. (The logo set for the start-up screen and background is reset.) 40 ■ The default setting menu This menu shows placement status and other settings. Item Projection mode Description Sets projection mode in accordance with Placement Style. p.21 (Standard) (Rear) (Ceiling) (Rear ceiling) No signal power off Set the time to wait for the power to be turned off after the last operation is made with no input signal. Off (not turned off) 30 min. Auto input Set whether the input with signals is only selected or not. search On Off Power on Sets whether to turn on the power when the ON/STANDBY button is pressed (Manual), or when the power cord is plugged in (Auto). Manual Auto Easy setup Set the items of Easy setup and power ON/OFF. [ or : Enter setting mode] [ : Select item] [On Off] Auto focus On Auto v-keystone On Off Auto-setting On Off Power on Easy setup On Off Lamp power Sets the lamp power. Low Standard Fan mode Sets the cooling fan speed. Standard High Wireless standby Switch on/off the wireless LAN while the projector is in standby. On Off Remote control When two or more projectors are used and controlled by the remote control respectively, this menu sets the code for the projector and the remote control. [ or : Enter setting mode] [ : Select item] [ : Select from 1, 2, 3, 4] [ :Confirm] [ :Select OK to end] Press [Cancel] to return. Key lock Lock the control panel buttons. [ or : Enter setting mode] [ Select On/Off] [ :Confirm] [ Press [Cancel] to return. : Select item] [ : :Select OK to end] Reset all Press . (The password and user logo are not reset.) Resets all adjustments and settings to their factory settings. Yes No Password Password function p.33 Off On When [Password] is [On], the Password Setting screen is displayed. 41 Operations