Toshiba TDP-WX5400U Owners Manual - Page 20
Basic operations, Operations
View all Toshiba TDP-WX5400U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Basic operations 1 Turn on the power. Turn on the power by following the instructions in "Turning the power on" p.36 . 2 Select the language (When using the first time). When the projector is used for the first time after purchase, the start menu for language selection is displayed in English. (If the screen is out of focus, adjust it according to the step 6.) 5 Projector placement angle adjustments The placement angle and the height of the projected image can be adjusted by the foot adjusters. 1 To raise the level of the projector, twist the adjusters clockwise. Operations Use the p or q button to select the desired language and press the Message for setup confirmation is displayed in a selected language. button. Notes • When the projector is turned on the next time, the start menu does not appear upon startup. However, if [All data] is executed from the Reset menu, the start menu will be displayed the next time when the power is turned on. • The language can also be set from the Setting-Setting 1 menu p.51 . • This owner's manual assumes that English has been selected. 3 Activate the connected device. Turn on and start the connected device such as a computer. 4 Press the INPUT button. An image of the connected equipment is projected. Each time you press the INPUT button, it switches to the input of the connected equipment that is outputting video signals. 38 2 To lower the level of the projector, lift the projector and twist the adjusters counter clockwise. 6 Adjusting zoom and focus 1 If you wish to adjust the screen size, use the ZOOM buttons on the projector or remote to adjust the screen size. 2 Use the FOCUS buttons on the projector or remote to adjust the focus. 7 Adjusting the Picture Position and Picture Size The Picture Position and Picture Size can be adjusted manually from the lens control panel or from the remote control unit (LENS SHIFT button) Adjusting Picture Position and Picture Size Manually 1 Press the Select keypad in any direction to bring up the [Lens Shift] window. 2 Press the directional key as required to shift the image. Releasing the directional arrow will re-center the cursor. 39