Toshiba TLP-S10U Mobile Projector TLP-S10U Users Guide - Page 19
Before calling service personnel - projector specifications
UPC - 032017198388
View all Toshiba TLP-S10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Before calling service personnel If you think something is wrong, check the followings before contacting customer service. Please see "Trouble indications" p.35 as well. If This Happens Check No power • Is the power cord plugged in? Is it connected to the projector? • Is the lamp cover loose? p.35 Power goes out during use • Is the ambient temperature high? p.35 • Is the air filter clogged? p.35 • Is the air intake or air exhaust blocked? p.35 No picture • Is the projector turned on? p.22 • Is the mute function on? p.26 • Is the brightness setting minimized? p.30 • Are the connections set up correctly? p.19 • Are all the connected devices functioning properly? No audio • Is the projector turned on? p.22 • Is the mute function on? p.26 • Is the volume setting minimized? p.23 • Are the connections set up correctly? p.19 • Are all the connected devices functioning properly? Picture not displayed correctly • Is the input signal supported by the projector? p.38 , p.39 • Is the correct video mode selected? p.24 • Is the correct signal format selected? p.24 • Is the selecting of computer or Y/PB/PR input correct? p.22 • Is there something generating an abnormal video signal, for instance the video tape? Picture blurred Part of picture out of focus • Is the lens dirty? p.33 • Is the lens focus adjusted optimally? p.23 • Is the projection distance within the projector's supported range? p.18 • Is the projector's screen placement angle tilted too far? p.18 • Are the sharpness or sampling phase adjustments off? p.24 p.30 Image is dark • Are the brightness or contrast adjustments off? p.30 • Is the lamp nearing the end of its service life? p.30 Colors too light Bad shading • Are the color, tint, R-level, G-level, or B-level adjustments off? p.30 • Is the screen dirty? • Is the lamp nearing the end of its service life? p.28 Remote control doesn't work • Are the remote control's batteries drained? • Are the batteries inserted into the remote control correctly? p.17 • Is the remote control being used within the effective range? p.17 • Are there any obstructions between the remote control and projector? • Are there any fluorescent or other bright lights shining at the projector's infrared remote sensor? 36 Connection terminal Others Specifications I List of general specifications Item Specification Consumption Power 220 W Weight 2.2 kg External Dimensions 303 × 84 × 206 mm (W × H × D) (including protruding parts) Cabinet material* PC+ABS resin and ABS resin Conditions for usage environment Temp: 0°C to 35°C; relative humidity: 30% to 70% Display method 3-panel transmission Panel size 0.5 type LCD Panel Drive system TFT active matrix Picture 480,000 pixels (800H × 600V) elements Lens F=1.8 Lamp High-pressure mercury lamp Projection screen size 40-300 type Projection distance 1.52-11.59 m Speaker 1 W (Monaural) COMPUTER terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use) MONITOR terminal Mini D sub 15 pin RGB / Y/PB/PR (dual use) S-VIDEO terminal Mini DIN 4 pin VIDEO terminal RCA Pin Jack, 1 V (p-p), 75 Ω AUDIO terminal 3.5mm dia. stereo mini-jack, 1.5V (rms); 22 kΩ or more CONTROL terminal Mini DIN 8 pin (RS-232C) * Each plastic part displays the materials it is made from, in order to facilitate recycling after this product becomes no longer usable. 37