Toshiba TLP-XC2000U Owners Manual - Page 30
Specifications Continued
View all Toshiba TLP-XC2000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Specifications (Continued) ■ List of supported signals (Y/PB/PR signals) Signal format 480i(525i)@60Hz 480p(525p)@60Hz 576i(625i)@50Hz 576p(625p)@50Hz 720p(750p)@60Hz 720p(750p)@50Hz 1080i(1125i)@60Hz 1080i(1125i)@50Hz fh(kHz) 15.73 31.47 15.63 31.25 45.00 37.50 33.75 28.13 fv(Hz) 59.94 59.94 50.00 50.00 60.00 50.00 60.00 50.00 ■ List of supported signals (Video, S-Video signals) Video mode NTSC PAL SECAM PAL-M PAL-N PAL-60 NTSC4.43 fh(kHz) 15.73 15.63 15.63 15.73 15.63 15.73 15.73 fv(Hz) 60 50 50 60 50 60 60 fsc(MHz) 3.58 4.43 4.25 or 4.41 3.58 3.58 4.43 4.43 ■ Pin assignment of COMPUTER 1 IN, COMPUTER 2 IN & MONITOR OUT terminals 5 1 Pin Pin description No. During RGB input During Y/PB/PR input 1 Video signal (R) Color difference signal (PR) 2 Video signal (G) Luminance signal (Y) 10 6 3 Video signal (B) 4 GND Color difference signal (PB) ∗ 15 11 5 GND ∗ Mini D sub 15 Pin connector 6 GND (R) 7 GND (G) GND (PR) GND (Y) Input Signal 8 GND (B) GND (PB) • RGB input 9 N.C ∗ RGB signals: 0.7V (p-p) 75 Ω 10 GND ∗ Horizontal sync signal: TTL level (Pos/neg polarity) 11 GND Vertical sync signal: TTL level (Pos/neg polarity) ∗ • Y/PB/PR input 12 N.C ∗ Y signal: 1.0V (p-p) 75 Ω 13 Horizontal sync signal ∗ PB/PR signals: 0.7V (p-p) 75 Ω 14 Vertical sync signal ∗ 15 N.C ∗ ∗ Do not connect anything. 58 ■ CONTROL terminal ● Pin assignment 7 8 6 5 3 4 21 Mini DIN 8 pin connector ● Interface format 1 Communication method 2 Communication format 3 Data format Pin No. 1 2 3 4 5 6 7 8 Signal Name RXD CTS DSR GND RTS N.C TXD GND Description Receiving data Consent to send Data set ready Signal ground Request to send No connection Sending data Signal ground RS-232C, 9600bps, No Parity, Data Length: 8 bits; Stop Bit Length: 1 bit STX (02h) Command (3Byte) ETX (03h) Only 1 command valid per communication. For input commands, only ASCII-compliant all-uppercase alphanumeric characters supported. 4 Replies Acknowledge ACK (06h) CR (0Dh) Data ... Normally ended ACK (06h) ESC (1Bh) ... Aborted No acknowledge NAK (15h) If commands are to be sent consecutively, wait for the response from the projector before sending the next command. ● Main Commands Item Power on Power off Icon display on Icon display off Auto setting (RGB input) Status display on Status display off Command PON POF MO0 MO1 PAT DON DOF Note • Contact your dealer for control cable and other commands. ■ Separately sold product Replacement Lamp Model TLPLW11 59 Others