Toshiba Tecra A6-EZ6313 User Guide - Page 55
Installing a memory module, Before you install or remove a memory module, turn off
View all Toshiba Tecra A6-EZ6313 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Getting Started Adding memory (optional) 55 NOTE Before adding external devices or memory, Toshiba recommends setting up your software. See "Setting up your software" on page 45. Installing a memory module An additional memory module can be installed in the memory module slot on the base of the computer. You will need a small Phillips screwdriver for this procedure. If you use the computer for a long time, the memory module will become hot. If this happens, let the module cool to room temperature before you replace it. To avoid damaging the computer's screws, use a small Phillips screwdriver that is in good condition. Installing a memory module with the computer's power on may damage the computer, the module, or both. The computer has one memory module slot. You can install one memory module. Before you install or remove a memory module, turn off the computer using the Start menu. If you install or remove a memory module while the computer is in Standby or Hibernation mode, data will be lost.