Toshiba Tecra A8 User Manual - Page 59
above, then repeat this step., Do not force the memory module into position.
View all Toshiba Tecra A8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Getting Started Adding memory (optional) 59 13 Once the module's connector is fully inserted into the socket, press downward on the top edge of the module to seat the module into the latches at the sides of the socket. These latches should "snap" into place securely with the corresponding cutouts in the side of the module. If the latches and cutouts do not line up correctly, repeat step 12 above, then repeat this step. Front of computer Memory slots (Sample Illustration) Inserting the memory module into the slot Do not force the memory module into position. The memory module should be completely inserted into the socket and level when secured in place. latch latch (Sample Illustration) Pressing down on the memory module
59
Getting Started
Adding memory (optional)
13
Once the module’s connector is fully inserted into the
socket, press downward on the top edge of the module to
seat the module into the latches at the sides of the socket.
These latches should “snap” into place securely with the
corresponding cutouts in the side of the module. If the
latches and cutouts do not line up correctly, repeat step
12
above, then repeat this step.
(Sample Illustration) Inserting the memory module into the
slot
Do not force the memory module into position. The
memory module should be completely inserted into the
socket and level when secured in place.
(Sample Illustration) Pressing down on the memory module
Memory slots
Front of computer
latch
latch