Toshiba Tecra M2V User Guide - Page 58
Directing the display output when you turn on the computer, Connecting Other External Devices
View all Toshiba Tecra M2V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
58 Connecting Other External Devices Using external display devices 2 Connect the device's power cable to a live electrical outlet. 3 Turn on the external device. 4 Set the display mode by pressing Fn + F5 or by setting the Display Properties settings. For more information, see "Directing the display output when you turn on the computer" below. Directing the display output when you turn on the computer Once you've connected an external display device, you can choose to use the internal display only, the external device only, or both simultaneously. The quickest way to change the display output settings is to use the display hot key (Fn + F5): 1 Press Fn and F5 simultaneously. 2 While holding down Fn, press F5 repeatedly until the setting you want takes effect. This hot key cycles through the settings in the following order: ❖ Built-in display only ❖ Built-in display and external device simultaneously ❖ External device only 3 Release the Fn key. TECHNICAL NOTE: You can also change these settings using the Display Properties Box. Set the option for the video controller by clicking Start, then Control Panel and clicking Display. Choose the Settings tab, click the Advanced button, select Display Device, select the applicable Monitor type, click Apply or OK.