Toshiba W627 Owners Manual - Page 19

PLAYBACK PLAYBACK Playback This section explains the basic playback operation. Preparation • Select the video channel (3 or 4) or video input mode on the TV. • Press VCR to set the remote control operating the VCR. Basic Playback VCR TV POWER 1 Load a recorded cassette. TIMER CH/TRK 123 456 CH/TRK Power is turned on. If the cassette has no safety tab, SLP VCR REC S L TV VOL 789 playback starts automatically. I.SELECT DISPLAY 0 100 REMAIN/ COUNTER COUNT RESET TV/ VCR SP/ SLP REC TIMER 2 Press PLAY/x2 to start playback. TIMER SLOW PLAY/x2 PAUSE /STILL VCR REC L CURSOR REW FF STOP PROG. CANCEL ENTER FF 2,3 3 To stop playback, press STOP. A.SELECT EJECT CM SKIP REW VCR Double Speed Playback 1 Press PLAY/x2 during playback. A tape runs at double speed playback. To resume normal playback Press PLAY/x2 Rewinding / Fast-forwarding Press REW or FF in the stop mode. Adjusting the tracking When playback starts, the VCR automatically adjusts the tracking for clear pictures and sound (Digital Auto Tracking). If the VCR cannot locate the best possible tracking point, hold down one of CH/TRK to adjust the tracking manually. Notes • During the adjusting, the playback picture and sound may be distorted. • The digital auto tracking is activated only in the playback mode. • The noise on the screen may not be completely eliminated depending on the tape used, especially when the tape was recorded on another VCR. S-VHS Quasi Playback (SQPB) • This VCR can also play back at tape which is recorded in S-VHS format. But the playback pictures does not have the same quality and resolution as the original S-VHS playback picture. • This VCR cannot record in S-VHS format. • SQPB is an abbreviation for S-VHS Quasi Playback. 19