Toshiba W627 Owners Manual - Page 31
Before Calling Service Personnel
View all Toshiba W627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
ADDITIONAL INFORMATION Before Calling Service Personnel Check the following symptoms before requesting servicing. No power. • The power cord is not plugged in. - Plug the power cord into the outlet firmly. Although the power is on, the VCR will not work. • There is no cassette. - Load a cassette. (page 18) The clock does not work. • There has been a power failure. - Reset the clock. (page 15) The timer does not work properly. • The time is incorrect. - Set the clock correctly. (page 15) The picture does not appear on the TV screen. • The video channel or video input mode is not set correctly. - Set the TV channel to the video channel (3 or 4) or set the video input mode on the TV. (page 11) • The TV signal is weak. - Adjust the antenna direction or use an optional antenna booster. • The power cord is not plugged in. - Plug the power cord into the outlet firmly. The picture does not appear on the TV screen during recording and playback. • The video channel or VCR mode is not set correctly. - Press TV/VCR to select the VCR mode and set the TV channel to 3 or 4. (pages 11, 12) The VCR does not record. • The loaded cassette has no safety tab. - Use a cassette with a safety tab or cover the hole with adhesive tape. (page 18) The playback picture is poor. • Tracking is not set appropriately. - Adjust the tracking manually. (page 19) • The video heads are dirty. - Clean the video heads with a commercially available cleaning tape. The desired sound is not heard, such as SAP, stereo, or regular sound. • Setting of sounds is not correct. - Select a desired sound using A.SELECT. (page 28) Noise is present in the Hi-Fi sound being played. • Tracking is not set appropriately. - Adjust the tracking manually. (page 19) The timer recording function does not work. • There is an error in programming. - Reset the timer recording program. (page 27) • There is no cassette in the VCR. - Load a cassette with the safety tab attached. (page 18) • The cassette does not have the safety tab. - Use another cassette with a safety tab or cover the hole with adhesive tape. (page 18) • The timer indicator is not displayed. - Press both TIMER simultaneously. (page 26) • There has been a power failure. - Reset the clock. (page 15) The remote control does not work properly. • The batteries are exhausted. - Replace all batteries. (page 10) • The remote control is operated beyond the operating range. - Make sure the remote control is within 30° of the remote sensor on the VCR. (page 10) • Too far from the VCR. - Use the remote control within 7 m from the front of the VCR. (page 10) • An obstacle may be in the way of the operation. - Remove the obstacle. • The operating mode of the remote control is not set correctly. - Press VCR or TV depending on the equipment you want to operate .(page 14,29) The cassette is ejected immediately after it is loaded. • The cassette was inserted with the label side not paralleling the compartment. - Reload it carefully. (page 18) The cassette does not go into the cassette compartment. • There is already a cassette in the VCR. - Eject the cassette and reload the new one. (page 18) 31 ADDITIONAL INFORMATION