Toshiba WRC-1000 User Manual - Page 39
Web Configuration
View all Toshiba WRC-1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Chapter 4 Web Configuration After you have configured your system as described in Chapter 3, Setup, you can proceed with the initial configuration described in this chapter. You can manage the Wireless Routing Center through a Web browser-based manager. To configure the Wireless Routing Center via Web browser, at least one properly configured computer must be connected to the network and reside on the same subnet as the Wireless Routing Center. The Wireless Routing Center comes with the default IP address of 192.168.10.1 and subnet mask of 255.255.255.0. The DHCP Server is enabled by default. You can also use the TOSHIBA WRC Finder program on the TOSHIBA Wireless Routing Center WRC-1000 Utility CD-ROM to open the Wireless Routing Center's Web Configuration page. NOTES: 1. If data is being transmitted while you are changing settings, transmission will be interrupted when you click Apply. 2. The DHCP server function is enabled before the Wireless Routing Center is shipped. If the LAN has other DHCP servers, the DHCP server function of the Wireless Routing Center must be disabled. 3. You will need Internet Explorer version 5.0 or higher. 4. If your browser is set to allow you to use a Proxy on your LAN, you will not be able to display the Wireless Routing Center set-up page. In this case, follow the steps below. a. Open the Start menu and open the Control Panel. b. Click Network and Internet Connections. c. Click Internet Options. d. Select the Connections tab and click LAN Settings. e. Clear the checkbox for Use a proxy server for your LAN (These settings will not apply to dial-up or VPN connections). f. Click OK. 4-1 WEB CONFIGURATION