Toshiba WT8-A PDW09C-00101L Users Manual Canada; English - Page 23
Turning on the power, This describes how to turn on the power.
View all Toshiba WT8-A PDW09C-00101L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
1. Plug the USB connector of the Micro-USB cable into the AC adaptor. Figure 2-1 Connecting the AC adaptor 1 2-pin 3-pin Either a 2-pin or 3-pin adaptor/cord will be included with the tablet depending on the model. 2. Plug the other smaller connector of the Micro-USB cable into the Micro-USB port on your tablet. Figure 2-2 Connecting the AC adaptor 2 2-pin 3-pin The Micro-USB connector of the Micro-USB cable must be correctly plugged into the Micro-USB port on the tablet. Failure to do so correctly may result in possible damage to the Micro-USB port. 3. Plug the AC adaptor into a live wall outlet. Turning on the power This section describes how to turn on the power. Never keep your body too close to the tablet while turning on the power. After you turn on the power for the first time, do not turn it off until you have set up the operating system. Volume cannot be adjusted during Windows Setup. The tablet can not be powered on by pressing the power button if the battery power is completely exhausted. It is recommended to charge the battery pack by connecting the AC adaptor for 30 minutes before turning on the power. Press the power button to turn on the tablet. User's Manual 2-4