Toshiba X400 User Guide - Page 21
Protecting data on an SD™ Card, Sample Illustration Inserting and removing an SD™ Card - memory card
View all Toshiba X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started 21 Inserting and removing an SD™ Card (optional) 2 Insert the memory card into the slot until it locks in place as shown below. To remove the SD™ Card, press inward to release it. When the card pops out, grasp it and pull it straight out. (Sample Illustration) Inserting and removing an SD™ Card To prevent data corruption, it is recommended that you format the SD™ Card in the camcorder before using. All data will be erased if the SD™ Card is formatted. Make sure all data is copied to your computer or other media before formatting the SD™ Card. NOTE When a memory card is inserted, photos and videos are saved onto the card rather than the built-in memory. Protecting data on an SD™ Card Photos or videos cannot be recorded on an SD™ Card when the card is locked (read only); however, photos and videos can be viewed. Make sure the lock is in the writable position before recording photos and videos as shown below. Writable position Write-protected position (Sample Illustration) Protecting data on an SD™ Card