Toshiba XS35 Owners Manual - Page 50

Basic setup F: Remote control settings (Continued) Operating the second and third TOSHIBA HDD/DVD video recorders with the remote control of this recorder Switches the codes to operate the recorder. If you use the second and third TOSHIBA HDD/DVD video recorders, set the different remote codes for each recorder to avoid confusion in the response of the recorders. Example: Setting this recorder's remote control mode to DR 2, after another HDD/DVD recorder has been set to DR 1. (It is necessary to set the remote control mode on both the recorder and the remote control.) Setting up the recorder 1 Press SETUP. SETUP The setting menu appears. Start 50 Downloaded from www.Manualslib.com manuals search engine 2 Press / to select "Operational settings", then press ENTER. e.g. ENTER Operational settings Operation beep Off Completion beep On IR code DR 1 Instant skip interval 30 sec. Instant replay interval 10 sec. Title thumbnail point 35 sec. HDD/RAM title play Title resume Still group interval Priority contents 3 sec. Photo SETUP 3 Press / to select "IR code", then press ENTER. e.g. ENTER Operational settings Operation beep Off Completion beep On IR code DR 1 Instant skip interval 30 sec. Instant replay interval 10 sec. Title thumbnail point 35 sec. HDD/RAM title play Title resume Still group interval 3 sec. Priority contents Photo DR 1 DR 2 DR 3 SETUP 4 Press / to select "DR 2" (example), then press ENTER. The submenu disappears. Press ENTER button and the IR code you selected is ENTER activated. Operation may not be possible temporarily until you set the corresponding mode of the remote control. Proceed to the next setting.