Tripp Lite OMNIVS1500XL Owner's Manual for OMNIVS800/OMNIVS1000/OMNIVS1500XL U - Page 3

Quick Installation - battery

Get Tripp Lite OMNIVS1500XL PDF manuals and user guides View all Tripp Lite OMNIVS1500XL manuals
Add to My Manuals
Save this manual to your list of manuals

Page 3 highlights

Quick Installation 1 Plug the UPS into an outlet. NOTE! after you plug the UPS into a live AC outlet, the UPS will turn ON automatically. See "ON/OFF" Button description in the Basic Operation section if you want to place the UPS in any mode other than ON. Note: UPS system will function properly upon initial startup; however, maximum runtime for the unit's battery will only be accessible after it has been charged for 24 hours. 2 Plug your equipment into the UPS. The A outlets will provide battery backup and surge protection; plug your computer, monitor and other critical devices here.* The B outlets will provide surge protection only; plug your printer and other non-essential devices here. * Your UPS is designed to only support computer equipment. You will overload the UPS if the total VA ratings for all the equipment you connect to the (A) outlets exceeds the UPS's Output Capacity (see Specifications). To find your equipment's VA ratings, look on their nameplates. If the equipment is listed in amps, multiply the number of amps by 120 to determine VA. (Example: 1 amp × 120 = 120 VA). If you are unsure if you have overloaded the (A) outlets, run a self-test (see "MUTE/TEST" Button description). 1 A 2 OMNIVS800 shown A 2 OMNIVS1000 shown A NORM DELAY A B NORM DELAY A NORM DELAY B A B 2 OMNIVS1500XL shown 3 200912037 93-2248.indd 3 12/17/2009 11:05:58 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
3
Quick Installation
1
Plug the UPS into an outlet.
NOTE! after you plug the UPS into a live AC
outlet, the UPS will turn ON automatically.
See “ON/OFF” Button description in the
Basic Operation section if you want to
place the UPS in any mode other than ON.
Note: UPS system will function properly upon initial
startup; however, maximum runtime for the unit’s
battery will only be accessible after it has been charged
for 24 hours.
2
Plug your equipment into the
UPS.
The
A
outlets will provide battery backup
and surge protection; plug your computer,
monitor and other critical devices here.* The
B
outlets will provide surge protection only;
plug your printer and other non-essential
devices here.
* Your UPS is designed to only support computer
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect to the (A)
outlets exceeds the UPS’s Output Capacity (see
Specifications). To find your equipment’s VA ratings,
look on their nameplates. If the equipment is listed in
amps, multiply the number of amps by 120 to determine
VA. (Example: 1 amp × 120 = 120 VA). If you are
unsure if you have overloaded the (A) outlets, run a
self-test (see “MUTE/TEST” Button description).
1
2
A
A
B
2
A
A
B
OMNIVS1500XL shown
OMNIVS1000 shown
2
A
A
B
OMNIVS800 shown
200912037
93-2248.indd
3
12/17/2009
11:05:58 AM