Tripp Lite U442DOCK8B Owners Manual for Triple-Display USB-C Docking Station M - Page 7

Installation Installation Notes • After all devices are connected to the unit, be sure the power adapter is properly connected and the power button is turned on. • Connect the host computer or laptop to the U442-DOCK8-B's USB-C PD Charging port using the included USB-C cable. This cable will charge and power the host device. • Screenshots may vary based on operating system. • The computer or laptop will keep your previous display settings every time you power on/off. • Check your computer or laptop's display settings and set up in Extend Mode for normal installation. • If you change monitors, you may need to reset the display settings. • Some 4K monitors will occupy the entire 4K bandwidth and cause the third connected display to function incorrectly. • If your system runs Mac OS, external monitors connected will only support Mirror Mode (all displays will have the same output). • If your system is a Windows system and supports MST Mode, refer to below MST installation notes. 7