Troy-Bilt TB210 Operation Manual - Page 11
Side Discharge Chute - mower
View all Troy-Bilt TB210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
b. Slip plastic channel of grass bag over hooks on the frame. See Fig. 3-7. B Side Discharge Chute Your mower is shipped as a mulcher. To convert to side discharge, make sure grass catcher is off of the unit and rear discharge door is closed. 1. On the side of the mower, lift the side mulching plug. See Figure 3-9. Side Mulching Plug 1 A 2 Figure 3-7 2. Follow steps below to attach grass catcher: a. Lift rear discharge door. b. Place grass catcher into the slots in the handle brackets as shown in Fig. 3-8. Let go of discharge door so that it rests on the grass catcher. B A Figure 3-9 2. Slide two hooks of side discharge chute under hinge pin on mulching plug assembly. Lower the mulching plug. Do not remove side mulching plug at any time, even when you are not mulching. B Figure 3-8 To remove grass catcher, lift rear discharge door on the mower. Lift grass catcher up and of the slots in the handle brackets. Release rear discharge door to allow it to close rear opening of mower. Section 3 - Assembly & Set-Up 11