Troy-Bilt TB2BV Operation Manual - Page 1

Operator's Manual TB2BV EC 2-Cycle Electric Start Capable Handheld Blower / Vacuum English - Page 1 Français - Page 5 Removing Unit From Carton Assemble The Unit 1 Remove all contents from carton. 2 Insert the upper blower tube into the blower outlet and turn it clockwise until it locks into place. Assemble The Unit Starting The Unit Primer Bulb 3 Install the lower blower tube onto the upper blower tube and turn it clockwise until it locks into place. Choke Lever 40:1 1 Gallon 3.2 oz 4 Mix thoroughly in a separate fuel can: - 3.2 fl. oz. of 2-cycle engine oil - 1 gallon of unleaded gasoline NOTE: Do not mix directly in the fuel tank. Tools Required: • Flathead Screwdriver Handle On/Off Stop Control Cruise Control Spark Plug Upper Blower Tube Lower Blower Tube Muffler Cover Primer Bulb Trigger Air Filter Cover Starter Rope Choke Lever 5 Place the unit on a level surface. Fill the fuel tank. 10 X 16 Press the primer bulb 10 times, or until fuel is visible. 7 Move the choke lever to Position 1. Lower Vacuum Tube Upper Vacuum Tube Fuel Cap Starting The Unit Vacuum Elbow Vacuum Bag Strap Cinch Strap 18 Crouch in the starting position. 9 DO NOT squeeze the trigger. 5 X 10 Do not squeeze the trigger. Pull the rope 5 times. 11 Do not squeeze the trigger. Move the choke lever to Position 2. Vacuum Bag Zipper Starting The Unit 3-5 X 12 Do not squeeze the trigger. Pull the rope 3-5 times to start the engine. 113 Squeeze the trigger, or press down the cruise control, and allow the unit to warm up for 30-60 seconds. 14 Continue to squeeze the trigger. Move the choke lever to Position 3. Warm the unit for an additional 60 seconds. The unit may be used during this time. Need Help? Call 1-800-828-5500 DIDN'T START? Repeat the starting instructions. IF engine fails to start after 2 attempts, move choke lever to position 3 and pull the starter rope until engine starts IF unit still fails to start, refer to the operator's manual for additional starting and troubleshooting information Español - Page 11 IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND FOLLOW THE SAFE OPERATION PRACTICES WHILE OPERATING THE UNIT. NEED HELP? CALL 1-800-828-5500 IN U.S. OR 1-800-668-1238 IN CANADA 769-07209 P00 06/11