Turtle Beach Ear Force DX12 User's Guide - Page 5

Xbox 360® Setup 1. Connect the digital optical cable (included) from the digital output on your Xbox 360 to the digital input on the DSS2. (NOTE: Remove the protective caps from each end of the optical cable before inserting into the sockets.) 2. Connect the DSS2 USB power cable from the power socket on the rear of the DSS2 to a free USB port on your Xbox 360. 3. Slide the DSS2 power switch to the ON position. The Power LED on the DSS2 will turn ON. 4. Insert the green 3.5mm connector from the X12 headset to the Headphone Output Jack on the front of the DSS2. Then insert the USB connector from the headset to the USB Output on the DSS2. (NOTE: the pink mic connector on the X12 headset is not used.) 5. Adjust the Volume Control knob to adjust the overall volume level of the Headset Output. 4 3 2 Pink mic plug 5 (not used) Optical Cable (included) 1 USB Cable (included) Xbox 360 HDMI Audio Adapter 5 OR Console A/V cable or HDMI Cable NOTE: Older Xbox 360 models require an Xbox 360 HDMI Audio Adapter Cable for optical audio output (sold separately). If your HDTV has a optical AUDIO OUT jack, you can use it to connect the optical cable to the DSS2 and feed sound from the gaming console to the DSS2. Xbox 360 Xbox 360 Chat Setup Chat Volume Xbox 360 Input Mic Mute Xbox 360 Talkback Cable Xbox 360 Controller Configure Xbox 360 Settings 1. In the Xbox 360 System Settings, select: Settings > Audio > Accessory Settings > Audio Device Settings Set the "Digital Output" to "Dolby Digital 5.1" Digital Output Digital Stereo Current Setting Dolby Digital Dolby Digital 5.1 Dolby Digital 5.1 with WMA Pro Choose the digital output type for your system. This setting only applies to optical digital and HDMI audio outputs. Select Back 2. Settings > Preferences > Voice Set the "Voice/Game Volume" to 10 and set the "Voice Output" to "Play Through Headset" Voice Voice Volume 10 Game Volume 10 Mute Kinect Voice Output Play Through Headset Play Through Speakers Voice Output 6