Turtle Beach Ear Force DXL1 User's Guide - Page 8

Equalizer (EQ) Presets The DSS2 features multiple Equalizer presets to enhance your gaming audio experience. Press the Equalizer button on the front side of the DSS2 to cycle through the EQ presets as illustrated below: EQ Presets: 1. Flat 2. Bass Boost 3. Aggressive Bass Boost 4. Treble Boost 5. Aggressive Treble Boost 6. Bass + Treble Boost 7. Aggressive Bass + Treble Boost 8. Mid-Range Boost 9. Aggressive Mid-Range Boost The LEDs on the DSS2 will blink in sequence, starting with the Power LED, indicating the number of the preset selected. Press the Equalizer Button to cycle through the EQ Presets. Double press the button to turn off the EQ preset. Troubleshooting Xbox 360 Does Not Have Digital Output Older Xbox 360 models don't include an digital optical output. If this is the case with your Xbox 360, then you will have to purchase a cable that includes a digital output jack on the connector. Here are the Xbox 360 cables that support digital output: • Component A/V cable • VGA A/V cable • S-Video A/V cable • Advanced SCART A/V cable • HDMI audio adapter cable • Composite A/V cable with digital output If you are using HDMI and your Xbox A/V cable does not have a digital output, then you can alternatively connect the DSS2 digital optical cable to a digital audio output on your HDTV (if your HDTV has a digital optical output). No Audio When Using a BluRay Player Ensure the audio settings in the BluRay player are configured to play Dolby Digital. The DSS2 is not DTS compatible. If the DSS2 is connected to a digital source with a DTS signal, then the DSS2 will not receive audio. No Sound When Using a Digital Connection Ensure the digital cable is connected properly and receiving a signal. When connected to a console that is powered on, carefully check to see if a red light is being emitted from the end of the digital optical cable. Also be sure that the protective covers have been removed from the ends of the digital optical cable. Analog Input isn't Working The DSS2 analog input will automatically shut off whenever the digital input is active. To hear the analog input signal, either disconnect the optical cable from the digital input on the DSS2, shut off the device connected to the optical cable (e.g. Xbox 360) to disable the digital audio signal, or connect to the auxiliary input. 11 12