URC HDA-130 Owners Manual - Page 10
ConnectingSpeakers
View all URC HDA-130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Total Control Connecting Speakers The HDA-130 can be placed nearly anywhere and deliver power to a local zone. To connect speaker wire: 1. Connect the speaker wire to the positive (red) and negative (black) to the wire terminals available on the speaker (be mindful of proper polarity). Please refer to the manufacture's owner's manual for specific instructions on wiring the speaker. 2. Loosen the integrated slotted-style screws (turn counter-clockwise) and remove the phoenix connector from the terminal block on the HDA-130. 3. Secure the speaker wire into the phoenix connector (using the integrated slotted-styled screws), and reinsert it into the terminal block. 4. Using the integrated slotted-styled screws on the left and right sides of the phoenix connector (image at the right), secure the phoenix connector to the terminal block. CAUTION! Verify the polarity of the speakers and the wires before returning the phoenix connector into the terminal block on the amplifier. 8 HDA-130 Owner's Manual 6.5" SP-6EX HDA-130