URC HDA-4100 Owners Manual - Page 9
ConnectingSpeakers
![]() |
View all URC HDA-4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Total Control Connecting Speakers The HDA-4100 Multi-Zone Amplifier can power up to four (4) stereo zones, eight (8) mono zones or any combination of stereo/mono. To connect speaker wire: 1. Connect the speaker wire to the positive (red) and negative (black) to the wire terminals available on the speaker (be mindful of proper polarity). Please refer to the manufacture's owner's manual for specific instructions on wiring the speaker. 2. Loosen the integrated slotted-style screws (turn counter-clockwise) and remove the phoenix connector from the terminal block on the HDA-4100. 3. Secure the speaker wire into the phoenix connector (using the integrated slotted-styled screws), and reinsert it into the terminal block. 4. Using the integrated slotted-styled screws on the left and right sides of the phoenix connector (image at the right), secure the phoenix connector to the terminal block. CAUTION! Verify the polarity of the speakers and the wires before returning the phoenix connector into the terminal block on the amplifier. 7 HDA-4100 Owner's Manual 6.5" SP-6EX HDA-4100
![](/manual_guide/products/urc-hda4100-owners-manual-cc7a542/9.png)