Home » URC Manuals » Electronics Accessories » URC LT-3201-GR » Manual Viewer

URC LT-3201-GR Owners Manual

URC LT-3201-GR Manual

View all URC LT-3201-GR manuals

Add to My Manuals
Save this manual to your list of manuals

URC LT-3201-GR manual content summary:

URC LT-3201-GR | Owners Manual - Page 1
LT-3200 Switch Thank you for purchasing the URC LT-3200 Switch! This quick setup manual will help you plan and install your Z-Wave™ lighting solution. This product can be operated in any Z-Wave network with other Z-Wave certified devices from
URC LT-3201-GR | Owners Manual - Page 2
LT-3200 Switch Z-Wave Network Z-Wave can be used with a few devices or it can be used to build a large network. Below you'll see two examples. In the first example, a user has a Gateway which is looking for Z-Wave devices within its radius. Z-Wave devices outside this radius will not be found and
URC LT-3201-GR | Owners Manual - Page 3
LT-3200 Switch Material Thickness Signal Depreciation Aerated Concrete < 30cm // Stone 11.8" 20% Aluminum Coating < 1mm // 0.04" 100% Ceiling < 30cm // 11.8" 70% Furniture [Non-wood] < 30cm // 11.8" 40-60% [No Glass Metal Coating] < 5cm // 2.0" 10% Inner Wall < 30cm // 11.8"
URC LT-3201-GR | Owners Manual - Page 4
LT-3200 Switch Wiring Instructions Please do not try installing this device if you are unsure ou un appareil. ! MEDICAL EQUIPMENT ! Please DO NOT use this switch to control Medical or Life Support equipment. S'il vous plaît NE PAS utiliser ce gradateur pour contrôler l'équipement médical ou de
URC LT-3201-GR | Owners Manual - Page 5
LT-3200 Switch Wiring Instructions: Neutral Installation Please use this if you have a neutral wire, typically white, in the installation area. For use of traveler terminals with the LT-3200, more wiring diagrams and information are available within the product manual found at: https://urcportal.com
URC LT-3201-GR | Owners Manual - Page 6
LT-3200 Switch LT-3200 Switch A C B D A. Config Button: This button is used to enter the configuration menu on your switch. When you hold it down for 10-15 seconds, the LED Bar (B) will light up Yellow to indicate you are in config mode. It can also be used to trigger a favorite scene. After
URC LT-3201-GR | Owners Manual - Page 7
LT-3200 Switch Security 2 DSK The DSK can be found on the front of the switch (metal plate) and inside the box. Switch Configuration Settings There are a couple of ways to configure a switch. The first is via the switch itself, while the second is via the programming software. Parameter # Of
URC LT-3201-GR | Owners Manual - Page 8
% of prev report | 100 - 100% of prev report) 1-100% 13 No Load Type Adjustment Can be used for dumb switch setups. (0 - Detect Type | 1 - Manually Set Type) 0,1 51 No Instant On There is a delay that allows for multi-tap scene control. (0 - No Delay | 1 - Delay) 0,1 Default 0 0 0 15 160
URC LT-3201-GR | Owners Manual - Page 9
LT-3200 Switch Association Groups Group 1: Lifeline Members of this group will receive unsolicited messages related to the status of the switch. Group 2: Basic Setup Sends start and stop level change to associated devices. Grouping Identifier Max Nodes Group 1 0x05 Group 2 0x05 Send Commands
URC LT-3201-GR | Owners Manual - Page 10
, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, defect, these are the end user's exclusive remedies. All the URC equipment returned for service, exchange or repair require an RGA number. To obtain an RGA number, you