URC MRF-250 Owners Manual - Page 15

Frequently, Asked, Questions, Warranty, Specifications

Page 15 highlights

Frequently Asked Questions Can I use flasher/emitters that I have already installed in the system to connect to the MRF-250? Yes, the flashers are compatible, however flashers from other companies are equipped with a mini plug that is too large to fit the MRF-250's flasher jacks. Use Radio Shack part # 274-327 to convert 3.5mm plug Flasher/Emitters to the MRF250. I have a row of identical TV's. I've correctly set the flasher outputs using MX-3000 Editor, yet when I send a command to one of them, the TV next to the selected TV also responds. How do I stop this? Use an opaque material like electrical tape to cover the flasher and the front panel sensor of each of the TV's. Sometimes several layers are necessary. How can I increase the range of the MX-3000? Often, you can increase range by repositioning the MRF-250 and/or by reorienting the antenna. Try to avoid placing the MRF-250 directly adjacent to satellite receivers, personal computers or any other component using high speed microprocessors if possible. Warranty The MRF-250 is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased from an authorized Home Theater Master dealer. Units purchased from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items: -Damage from misuse, neglect, or acts of nature. -Products that have been modified or incorporated into other products. -Products purchased more than 12 months ago. -Units purchased from unauthorized dealers or companies. Specifications MRF-250 Power Supply: 9V 300mA IR Flasher Line Outputs: 2.5mm Mono Mini Jack RE Frequency: 418MHz Size: 5 I/8" x 3.5" x 1.25" (4.5" antenna up) Page 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Frequently
Asked
Questions
Can
I
use
fl
asher/emitters
that
I
have
already
installed
in
the
system
to
connect
to
the
MRF-250?
Yes,
the
flashers
are
compatible,
however
flashers
from
other
companies
are
equipped
with
a
mini
plug
that
is
too
large
to
fit
the
MRF-250's
flasher
jacks.
Use
Radio
Shack
part
#
274-327
to
convert
3.5mm
plug
Flasher/Emitters
to
the
MRF-
250.
I
have
a
row
of
identical
TV's.
I've
correctly
set
the
fl
asher
outputs
using
MX
-3000
Editor,
yet
when
I
send
a
command
to
one
of
them,
the
TV
next
to
the
selected
TV
also
responds.
How
do
I
stop
this?
Use
an
opaque
material
like
electrical
tape
to
cover
the
fl
asher
and
the
front
panel
sensor
of
each
of
the
TV's.
Sometimes
several
layers
are
necessary.
How
can
I
increase
the
range
of
the
MX
-3000?
Often,
you
can
increase
range
by
repositioning
the
MRF-250
and/or
by
re-
orienting
the
antenna.
Try
to
avoid
placing
the
MRF-250
directly
adjacent
to
satellite
receivers,
personal
computers
or
any
other
component
using
high
speed
microprocessors
if
possible.
Warranty
The
MRF-250
is
covered
against
any
manufacturers
defects
or
workmanship
for
a
period
of
one
year
from
the
date
of
purchase
if
purchased
from
an
authorized
Home
Theater
Master
dealer.
Units
purchased
from
online
auction
sites
or
other
unauthorized
resellers
have
no
warranty.
This
warranty
does
not
cover
the
following
items:
-Damage
from
misuse,
neglect,
or
acts
of
nature.
-Products
that
have
been
modified
or
incorporated
into
other
products.
-Products
purchased
more
than
12
months
ago.
-Units
purchased
from
unauthorized
dealers
or
companies.
Specifications
MRF-250
Power
Supply:
9V
300mA
IR
Flasher
Line
Outputs:
2.5mm
Mono
Mini
Jack
RE
Frequency:
418MHz
Size:
5
I/8"
x
3.5"
x
1
.25"
(4.5"
antenna
up)
Page
12