URC SNP-2 Owners Manual - Page 25

SNP-2 STREAMING NETWORK PLAYER Audio Setup The SNP-2's setup will determine whether or not the audio settings can be modified. The audio options will NOT be available, if your custom professional has integrated the SNP-2 with the Total Control system and a DMS unit. However, the audio options will be available, if the SNP-2 is setup as a standalone music source. The SNP-2 default audio output is set to a bit rate of 16 bit/44.1K. When ONLY S/PDIF or Analog Audio is ON, the audio output is played at a bit rate of 24 bit/192K. ● Streaming Output Turn the Streaming Output ON to stream music to DMS units connected to the Total Control system. Turn Streaming Output OFF to limit playback to analog and coaxial outputs only. ● Audio Fade When Audio Fade is set to ON the music will fade out, then in, when changing between music sources. ● HDMI Audio Output Turn ON the HDMI Audio Output to send digital audio to an HDMI device like a television or an audio receiver. ● S/PDIF or Analog Audio Output The S/PDIF Coaxial digital output or Analog Audio Output option should be set based upon the audio connection used for the SNP-2 (if any). Select Go Back to return to the previous screen. Page 22