URC TRC-1280 Owners Manual - Page 6
Connecting the Battery Pack, Using the Charging Base, Two-Way via Wi-Fi
View all URC TRC-1280 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
TRC-1280 TOUCH SCREEN Connecting the Battery Pack Unlock the rear cover by pressing down on the spring lock at the top of the cover. Remove the cover. For shipment from the factory, the battery is left out of the TRC-1280. Place the battery into the battery compartment, making sure you align the contacts on the battery to the contacts on the TRC-1280. The battery will snap into place when aligned properly. Replace the cover and snap it into place. Using the Charging Base Plug the 6V DC adapter into a power outlet and into the back of the charging base. Gently place the TRC-1280 into the cradle of the charging base. It automatically aligns itself to the contacts on the charging base. The Status light should immediately light. Red indicates that it is charging. Blue shows that it is fully charged. There is no harm in leaving the TRC-1280 on its charging base whenever it is not in use. Red indicates charging, Blue that the remote is fully charged. Two-Way via Wi-Fi To use the TRC-1280 with any two-way companion product, the TRC-1280 must be configured by your installer to be part of a LAN (local area network) via a Wi-Fi b/g access point or router. This is not user configurable. If you have any questions, consult your custom installer. Page 3