URC URC-RF20 Owners Manual - Page 17

CUSTOMIZING 31 SimpleSound Setup & Other "Punch Throughs" The bottom of the display flashes "PUNCH TO". Press the button for the Component that doesn't have volume control commands yet (i.e.,DVD). This is the Component you are going to PUNCH TO for the volume and mute commands. NOTE: If you want to PUNCH TO the MAIN Component, press the POWER OFF button at this time. STEP 5: The bottom of the display will then flash "PUNCH FROM". Now select the Component that has the volume commands you want to use (i.e.,TV for systems using the TV speakers, AUDIO for systems with surround sound receivers). The bottom of the display will flash "SAVED". STEP 6: Repeat STEPS 4-5 until all your Components operate the volume perfectly. STEP 7: Press the MAIN button twice to return to normal operating mode and test your SimpleSound™ settings. NOTE:The Punch Through feature is not limited to volume and can also be applied to channel selection or other functions. If you find yourself switching to a particular Component frequently to use a group of controls, consider using Punch Through for another group, as listed here: VOL CH PLAY VOD Volume Up,Volume Down and Mute Channel Up, Channel Down, Previous Ch and Channel (0-9) buttons. Play, Stop, Pause, Rewind and Fast Forward Guide, Menu, Info, Exit, Up, Down, Left, Right, Select Simply perform the steps outlined above, but in STEP 4, press one of the control options (CH, PLAY or VOD). Setting Backlight Options Setting Backlight Options You can customize the backlighting feature to suit your specific preferences by following these simple steps: 32 Adjusting Length of Backlight Time You can adjust the amount of time that the RF20 backlight stays on by entering the SETUP mode and proceeding to page 2 (using the PAGE ( ) UP button), then pressing the LIGHT display button on the LCD screen (not the Backlight button). Then enter the amount of time you would like the light to stay on using the number pad (0-99 seconds). After making your selection, press the SAVE display button. Adjusting Contrast You can make the text darker by pressing both the MAIN and cursor UP buttons at the same time. To make the text appear lighter, press both the MAIN and cursor DOWN buttons at the same time. Turning OFF Backlighting If you don't want backlighting at all (this extends battery life), press the ON display button that appears on the screen. The ON will change to OFF. Press the SAVE display button. Exit the setup mode by pressing the MAIN button. MAIN BUTTON UP & DOWN CURSOR HIGH CONTRAST LOW CONTRAST CUSTOMIZING