URC URC-RF20 Owners Manual - Page 4
Getting Started - programming
View all URC URC-RF20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
5 6 Activating Component Commands LIGHT BUTTON Activating Component Commands - Simple, Easy, Intuitive Once you've programmed RF20 for your Components, all you have to do to operate a specific Component is first, press the MAIN button. This will display Page 1 of the MAIN menu on the LCD screen. Page 1 of the MAIN menu displays five Components. Then, simply select the Component you want to operate by pressing the corresponding ScreenLabeled Component Display Button on the right side of the LCD Screen. As an example, if you press the TV Display Button, the display label at the top of the screen will change from MAIN to TV, and all the buttons on RF20 will work your TV. To operate another Component, simply press the MAIN button again to return to Page 1 of the MAIN menu and select the next Component you want to operate. If you don't see the Component you want to control on Page 1 of the MAIN menu, just use the PAGE ( ) ( ) buttons on the left side of the screen to bring up Page 2 of the MAIN menu which displays an additional five Components. Each Component is provided with five pages of pre-labeled command display buttons (or space for additional command display buttons). Once again, simply use the PAGE ( ) ( ) buttons to take you to the next command page, or return you to the previous command page. Light Button The fully backlit keypad makes the RF20 easy to use in the dark or dim lighting conditions. Simply press the LIGHT button to backlight all the keypad buttons and LCD screen. To turn off the backlight, press the LIGHT button again, or just wait ten seconds (the backlight automatically shuts itself off). Lights out! Try it out! GETTING STARTED GETTING STARTED LIGHT BUTTON TV DEVICE BUTTON MAIN BUTTON