Uniden ANA9620 English Owners Manual - Page 17

PROGRAMMING FUNCTIONS Programming Functions PBX OR PSTN In the Programming mode, you can select either Analog PBX or PSTN (Public Service Telephone Network) operation. The default is PSTN. Available features of each mode of operation are illustrated in the table below. Feature Analog PBX PSTN Conference Conference by PBX Connect Lines 1 & 2 Transfer Transfer by PBX Not Available Note: Both Conference and Transfer commands must be programmed to their respective keys before these features can be used. PROGRAM MODE SETUP To enter the Program mode, perform the following steps: 1. At , Standby press and hold the # , keys. While holding the # and keys, press and hold the talk key until a short beep is heard and the handset LCD displays: 2. Press the chan or vol keys to switch between and PSTN Analog PBX modes. 3. Press the talk key to enter your selection into memory. The handset LCD displays: The phone returns to . Standby For operation in PSTN mode, see page 19. For operation in PBX mode, see page 17. $