Uniden ANA9620 English Owners Manual - Page 7

! Use only the Uniden AC adapter AD9500 supplied with this base. WALL INSTALLATION w Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. To attach the wall mount stand to the base: 1. Slide the wall mount stand into the notches at the top of the base, rotate the wall mount stand down and snap it into place. 2. Plug the AC adapter into the base as previously described. 3. Place the AC adapter cord inside the molded channel of the wall mount stand. 4. Plug one end of the short telephone cord into the LINE(s) jack on the base. Then place the telephone cord(s) inside the molded channel(s) on the bottom of the wall mount stand. 5. Plug the other end of the short telephone cord into the modular wall jack. ! NOTE: DO NOT use an outlet controlled by a wall switch. 6. Place the base on the posts of the wall plate and push down until it is firmly seated. 7. Plug the AC adapter into a standard 120V AC wall outlet. $