Uniden BC248CLT English Owners Manual - Page 15
Programming Scanner Frequencies - how to program a
View all Uniden BC248CLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Programming Scanner Frequencies Before you can use your BC248CLT scanner, you must program the channels (except weather frequencies). Follow these steps: Example: Program 420.150 MHz into Channel 12. 1. Press MANUAL to stop scanning. 2. To select the channel (12), press 1, then 2 on the numeric keypad. Then press MANUAL again. OR Press w/v until channel 12 appears in the display. 3. Type in the frequency numbers, including the decimal point, using the numeric keypad: 420.0150. Channel digits flash as you make entry. 12
12
Programming Scanner Frequencies
Before you can use your BC248CLT scanner, you must program the channels (except weather
frequencies). Follow these steps:
Example:
Program 420.150 MHz into Channel 12.
1.
Press
MANUAL
to stop scanning.
2.
To select the channel (12),
press
1
, then
2
on the
numeric keypad. Then press
MANUAL
again.
OR
Press
▼
/
▲
until channel
12 appears in the display.
3.
Type in the frequency numbers, including the
decimal point, using the numeric keypad:
420.0150. Channel digits flash as you make entry.