Uniden BC248CLT English Owners Manual - Page 8
Wx/alert, Alarm, Alarm Set, Time Set, Lockout, Am/pm, Delay, Priority, Manual - review
View all Uniden BC248CLT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
10. WX/ALERT Key Selects Weather Mode. Also Selects Weather Alert ON/OFF. 11. ALARM Key Turns the Tone Alarm. Turns the Radio Alarm ON/OFF by pressing the key more than 2 seconds. 12. ALARM SET Key Press more than 2 seconds to enter the Alarm Time Set mode. 13. TIME SET Key Press more than 2 seconds to enter the Present Time Set mode. 14. TIME Key Press to review the clock time and cancel the Alarm time set and Present Time Set mode. 15. LOCKOUT Key Prevents scanning of the displayed channel. The L/O indicator appears when the current channel is locked out. Press LOCKOUT again to unlock the channel. Lockout is active only when the scanner stops on an active channel or a channel selected in Manual Mode. 16. AM/PM Key Select a.m. or p.m. when setting the clock time or alarm time. 17. DELAY Key Turns Delay function. When Scan stops on a channel it causes scanner to remain on that channel for 2 seconds before the scanning resumes to wait for a possible reply. 18. PRIORITY Key Turns Priority mode ON/OFF. In Priority mode the scanner samples the designated Priority Channel every 2 seconds while in Scan or Manual mode. If a transmission on the designated Priority Channel is detected, the scanner monitors that channel until no signal is present. 19. w/vKey Steps up or down through the minutes in the clock mode, channel in the Manual mode, or frequency in the Frequency Step Radio mode. 20. SCAN Key Press to start scanning. 21. MANUAL Key Press to stop scanning. Press MANUAL again to step to the next channel. Also use for direct channel access by first entering the channel number and then pressing MANUAL to go directly to that channel. 5